نمایش 321–360 از 961 نتیجه
EZ1028 Nitrite Analyzer
Online colorimetric analysis of Nitrite in water
EZ1000 Nitrite Analyzers achieve excellent precision and accuracy. At the heart of the colorimeter there is a compact photometer assembly developed especially for the EZ Series. Consumption of reagents is reduced by low volume analysis, yet high sensitivity is assured by a long optical path length. The limit of detection is in the low µg/L range.
FerroVer® Iron Reagent Powder Pillows
FerroVer® Iron Reagent Powder Pillows, 10 mL, pk/100
Product Number: 2105769
FerroZine® Iron Reagent, 500 mL
FerroZine® Iron Reagent, 500 mL
Product Number: 230149
FH950 Portable Velocity Meter
The perfect handheld solution for wastewater and environmental flow monitoring.
The lightweight, battery powered FH950 Velocity Flow Meter was designed to provide accurate velocity measurements while simplifying the entire measurement process in rugged field environments. Multiple user-friendly features designed into the FH950 allow you to quickly and easily determine stream velocities for required discharge measurements, or use the FH950 to quickly calibrate area velocity flow meters, or verify primary devices such as weirs and flumes.
FHEX Explosion-Proof Vibrating Horn
- 24VDC
- Produces 99 dBa @ 10′ (109 dBa @ 1m)
- Supervisory diode and four wires
- Cast aluminum housings
- Duty cycle 5 minutes on – 5 minutes off
- CSFM Approved
Fiber & Cable Machinery
For more than 40 years, Conductix-Wampfler has been proposing innovative solutions to achieve our customers’ expectations. We understand their needs and are flexible to develop new features and products that meet their requirements. Among standard equipment each customer has its own specific adaptations and we are able to adapt our range to these requests.
Filter FTSS-FL2-15
FTSS-FL2-15
Filter Regulator
Filter Regulator, 316 Stainless Steel, 1/4 NPT, Artic Service, Self Relieving, Manual Drain, 10 Bar, 5-10 Micron Filter.
Filter, 316 Stainless Steel
Filter, 316 Stainless Steel, 1/4 NPT, Manual Drain, 5-10 Micron Filter.
Filters Tee-type, FT Series
FTSS-FL2-2
Fixed Gas Detectors SMART S-MS MED
The SMART S-MS MED is designed specifically for use in marine environments and is certified by the Lloyd’s Register in accordance with MED/3.54 Regulation. The device is SIL2 certified and has options for both catalytic and infrared sensors for the detection of flammable gases.
Fixed Gas Detectors / Xgard
The Xgard range is a comprehensive selection of fixed multi gas detectors that meet the diverse requirements for gas detection in industries throughout the world. This includes many water treatment, oil and gas, power, research facility and manufacturing installations.
Fixed Gas Detectors FGard H2 Flame Detector
Introducing the Fgard H2 by Crowcon, a breakthrough in Hydrogen Flame Detection.
The FGard H2 delivers first-in-class flame detection with intelligent heated optics for clearer results and advanced optical verification to greatly reduce false alarms
Fixed Gas Detectors Open Path Gas Detectors
Crowcon offers open-path infra-red (IR) gas detection systems based on well-proven technology for fast and effective combustible gas detection over a line-of-sight up to 200m long.
Fixed Gas Detectors SMART 3G-D2
The SMART3G-D2 fixed gas detector has sensor options for detecting more than 50 toxic, flammable and refrigerant gases. It is ideal for a variety of industrial applications and harsh environments. The device features non-intrusive calibration and a 4-digit back-lit display for the gas concentration reading, 5 mode status LED and a high visibility multi-colour LED light ring.
Fixed Gas Detectors XgardIQ
The new XgardIQ, our most intelligent fixed gas detector, increases safety by minimising the time operators must spend in hazardous areas.
This versatile transmitter and gas detector has a range of features that protect engineers and support facilities managers of oil, gas, chemical & petrochemical plants to name a few.
Available fitted with a variety of sensors for flammable, toxic, oxygen or fixed H2S gas detection.
(SIL-2) Safety integrity level 2 certified gas monitor.
flask-rb-2 neck-angled side arm-cn : NS 29/32-side neck : NS 19/26-500 ml
Manufactured from heat resistant, durable borosilicate glass according to DIN 12394 standard. Thick wall, heavy base and reinforced rim prevent breakage during washing and transportation. Perfectly grinded NS necks with smooth interior guarantee excellent leakproof closure. Inscriptions are printed with white enamel.
FlexFoil PLUS Sample Bags
FlexFoil® PLUS 1-liter Sample Bag with single stainless steel septum fitting, pk/10
External dimensions: 8.75 x 9.75 inches
May be subject to additional freight charges
FlexFoil PLUS Sample Bags
FlexFoil PLUS Sample Bags, 1 Liter, Single Polypropylene Fitting Overview
FlexFoil® PLUS 1-liter Sample Bag with single polypropylene septum fitting which combines the hose/valve and the septum holder into one compact fitting, for use with small Vac-U-Chamber Cat. No. 231-940, pk/10
External dimensions: 8.75 x 9.75 inches
May be subject to additional freight charges
FlexFoil PLUS Sample Bags
FlexFoil PLUS Sample Bags, 3 Liters, Single Polypropylene Fitting Overview
FlexFoil® PLUS 3-liter Sample Bag with single polypropylene septum fitting which combines the hose/valve and the septum holder into one compact fitting, ea
External dimensions: 11.75 x 12.75 inches
May be subject to additional freight charges
Floating ball valves
The floating ball valve is a kind of valve in which the ball is not rigidly held on its rotational axis and so is free to float between seats. Sealing is achieved by the action of the pressure, which pushes the ball against a seat and the body construction is two pieces, bolted joint, made by forging, forged or rolled bar.
The floating ball valve is one of the possible types of on-off ball valves, that are shutoff valves suitable for use in various types of processes, available in different pressure classes.
Flow cell, quartz, rectangular aperture 6 x 3 mm
Flow cell, quartz, rectangular aperture 6 x 3 mm, M6 threaded inlet and outlet ports, 50 mm pathlength, 1.05 mL, z height 20mm. Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers
Flow Control Valve
Flow Control Valve, 316 Stainless Steel, 1/4 NPT, 345 Bar, Nitrile
Flow Elements
The Orifice Plate Assembly is the simplest Differential Pressure instrument for flow measurement, used in many applications.
Among the primary Flow Elements, the orifice plates are the most common solution
Flow Monitor Non-Invasive Flow Measurement sensor
The Pulsar Flow Monitor is designed to be combined with the FlowPulse Sensor, a dedicated wall-mounted device that gives an instant indication to pipe flow. The unit is ideal for fixed installations, that require constant pipe flow measurements. The Flow Monitor can be AC or DC supplied and provides the power and a simple interface for the FlowPulse non-contacting, clamp-on flow sensor. This small and compact unit expands the capability of the FlowPulse, providing two relays that can be programmed as an alarm or control for pipe flow or velocity – alternatively, either relay can be programmed as a totalizer.
Flow sight glass with double glazing
The ACI flow sight glass type 550D is based on the sight glass type 550 with cast body. It is a solid flow sight glass for installation on DIN/EN flanges.
Flow sight glass with indicating rotor
Flow sight glass type 550-K with indicator flap
Flow Switch
- horizontal mounting
- single switching unit (on request, two SPDT switches with simultaneous action can be supplied)
- Set point can be adjusted to between 20 ÷ 50% of max. flow rate (Q)
- Fixed differential max. 30% of max. flow rate (Q)
- Accuracy: ± 5% of max. flow rate (Q
- max. temperature 135˚C
- max. pressure 10 Bar or 50 Bar with CV BP version
- max. pressure drop 4000 mm H2O
- accuracy of flow indication ± 15% of f.s. (only on mod. CVM)
- special versions for viscous fluids
FlowCERT Lite
The FlowCERT Lite from Pulsar Measurement brings the sophistication of FlowCERT, fully certified to MCERTS Class 1, within reach of many more applications.
The FlowCERT Lite system features: FlowCERT controller, dB3 transducers and an external PT100 Class B3 temperature sensor.
Fluid delivery system
Build to spec – leveraging decades of design expertise
- Reduce lead time
- Reduce costs
- Reduce risk of quality escapes
- Facilitate collaborative design iterations
Flush head, Gas Clean connecting unit
Flush head, Gas Clean connecting unit. Used to flush gas lines connected to Gas Clean Filter connecting unit or base plate
Free Chlorine Analyzer
The FCA330 is a panel mounted, ready to use Free Chlorine Analyzer. It is designed to monitor free chlorine in drinking water, rinse water, cooling water or other fresh water samples from 0.05-20 ppm Cl2. It features a plug and play design that incorporates a flow control device, a pH sensor, a chlorine sensor and the LXT330 controller conveniently mounted on a PVC panel.
FCA330: General Purpose, Non-hazardrous area installation
FCA380: Hazarouds area certified
Funnel holder, stainless steel for 140 – 240 mm dia
Manufactured from high quality, corrosion resistant chromated steel for holding all kinds of funnels up to 150 mm diameter in the most secure way. The extendable funnel ring guarantees practical use with different funnel heights.
Gas Analyser for IR-Sensitive Gases and Oxygen BA 5000
- Sturdy 19” sheet steel housing
Option: Desktop version with handles - NAMUR-based operation
- Quick and easy parametrisation and setup
- AUTOCAL with ambient air for virtually maintenance-free operation
GAS ASPIRATING PUMP AP-20 Series
Available in four different grip colours (blue, red, green and yellow).
Gas Detector with Signal Converter SD-3 series
Features
・Next generation high performance sensor “F Sensor Series”
is installed, greatly improving both functions and
performance.
・Complies with different global standards (including planned
certifications).
・Wide range of output options.
・Rugged housing construction allows use even in harsh
environments.
・Wide range of types to suit a variety of uses and installation
environments.
Model list
SD-3GH, SD-3GHS (Diffusion type)
SD-3DGH, SD-3DGHS (Suction type)
SD-3SC+GD-3GH/GD-3GHS (Remote type)
Gas filter 940 A2B2E2K1
Gas jet vacuum pump
Gas jet vacuum pumps type gp1 and lvp1 are based on proven jet pump technology and often used to evacuate pipelines, vessels, and plants. They are used to mix and compress gases.
