نمایش 161–200 از 961 نتیجه
Capacitance point level switches
Accurate, reliable, and repeatable. The capacitive point level switches, SITRANS LCS and Pointek CLS series, ensure excellent measurement performance, even under harsh and difficult conditions such as interface, high-pressure and high-temperature applications.
Carbonyl Compounds as DNPH Derivatives
CCS Flow Switches
CCS Flow Switch design is based on differential pressure measurement across a venturi (Bernoulli effect) translated to flow rate. The Venturi measures a fluid’s flowrate by reducing the cross sectional flow area in the flow path and generating a pressure difference.
cell counter-mechanical
Multi use mechanical counter with maximum counting capacity up to 9999 for counting blood cells, bacterial colonies, drops of liquids, or any repetitive action. Featured a quick reset knob, lens window for easy reading, and finger ring for a secure grip. Sturdy and chrome finished metal housing offers long life cycle.
CENTRIFUGAL COMPRESSORS API 672 AND API 617
Stranich designs integrally geared compressors with 3D semi-open impeller overhung mounted directly on the high-speed shaft of the gearbox.
It’s an high efficient solution with minimum mechanical losses, for petroleum, chemical and gas industries.
- Driven by electric motors or steam turbines.
- Flow rate up to 300.000 m3/h, static pressure up to 150 bar, pressure ratio up to 2,5, speed up to 30.000 rpm
Centrifugal Fan (AIR/GAS)
The rotating parts are not in contact with the casing during rotation. There is therefore no friction during operation and thus no internal lubrication is necessary. The gas moving through the machine remains uncontaminated and completely oil-free.
The other main advantages of using the MAPRO® MCF centrifugal fans are:
- easy installation;
- low noise level;
- no vibration;
- pulsation free gas flow and no surge;
minimal maintenance.
Centrifugal Fans/Blowers
Centrifugal fans type TR are designed for heavy duty industrial applications high flow rate and where the complete reliability is considered essential.
Centrifugal fans TR are used usually when the fluid is very dusty and abrasive.
Usual design conditions are:
- volumetric flowrate up to 300.000 m3/h
- static pressure up to 800 mmH2O
- installed power up to 1000 kW
Centrifugal Fans/Blowers
Centrifugal fans type TSS are designed for heavy duty industrial applications high flow rate and where the complete reliability is considered essential.
Usual design conditions are:
- volumetric flowrate up to 350.000 m3/h
- static pressure up to 1000 mmH2O
- installed power up to 900 kW
Centrifugal Fans/Blowers
Centrifugal fans type TSAN are designed for heavy duty industrial applications with medium-high flow rate and where the complete reliability is considered essential.
Usual design conditions are:
- volumetric flowrate up to 500.000 m3/h
- static pressure up to 1.850 mmH2O
- installed power up to 2.000 kW
Centrifugal Fans/Blowers
Centrifugal fans type K and KR are designed for heavy duty industrial applications with medium-low flow rate and where the complete reliability is considered essential.
Usual design conditions are:
- volumetric flowrate up to 200.000 m3/h for K series and 120.000 m3/h for KR series
- static pressure up to 1.850 mmH2O
- installed power up to 1.000 kW for K series and 800 kW for KR series
Ceramic Homogenizers, 50 mL tubes, 100/pk
Ceramic Homogenizers, 50 mL tubes, 100/pk. Used to grind and homogenize samples for your QuEChERS sample preparation workflow
Certified Reference Material, Aniline Point Standard
Certified Reference Material, Aniline Point Standard, Jet Aviation Fuel, 58.48°C Nominal, 250 mL
Certified Reference Material (CRM) for Aniline Point on Jet Aviation Fuel, ASTM D611
Cesium (Cs) standard, 1,000 µg/mL, in 5% HNO3, 100 mL
ICP-OES Standards (single element)
Part Number:
Cesium (Cs) standard, 1,000 µg/mL, in 5% HNO3, 100 mL
Check valve
RITEC check valves prevent backflow of water and mitigate pressure surges through their gradual and controlled closing mechanism. Their axially-flowing, cast-body design minimizes pressure losses while ensuring maximum resistance to cavitation and noise. In addition to the standard model, AC and CP versions are available to further reduce cavitation phenomena.
Check Valves
BEL Valves’ Check Valve range supports client needs for a flexible approach to solutions where protection against backflow and pressure surges are concerned.
chek-mate Flowmeter
chek-mate Flowmeter, 0.50 to 5 L/min, with NIST Standard Traceable Calibration Certificate, Kit Overview
Medium Flow chek-mate Flowmeter Kit with CalChek, 0.50 to 5 L/min, includes 9-volt alkaline battery, CalChek automatic flow rate verification, NIST standard traceable calibration certificate, and pulsation dampener.
Chemical Oxygen Demand (COD) TNTplus Vial Test
Chemical Oxygen Demand (COD) TNTplus Vial Test, ULR (1-60 mg/L COD), 25 Tests
Product Number: TNT820
Chemical Oxygen Demand (COD) TNTplus Vial Test
Chemical Oxygen Demand (COD) TNTplus Vial Test, UHR (250-15,000 mg/L COD), 150 Tests
Product Number: TNT82306
Chloramphenicol D5 (ring D4, benzyl D)
Product Code:DRE-C11120100
CAS Number:202480-68-0
Product Format:Neat
Lot Number:G1348240
Expiry:2029-02-20
Molecular Formula:C11 2H5 H7 Cl2 N2 O5
Chlorantraniliprole
Product Code:DRE-C11145000
CAS Number:500008-45-7
Product Format:Neat
Lot Number:G1365311
Expiry:2027-04-25
Molecular Formula:C18 H14 Br Cl2 N5 O2
Chloride QuanTab® Test Strips, 300-6000 mg/L
Chloride is found in nearly all natural waters and affects human taste above 250 mg/L. High levels inhibit plant growth, and many industrial processes need to limit chloride concentration. With Hach’s chloride test strips, technicians in the field can test many samples in only a few minutes, and make immediate evaluations on-site, without any measuring, set-up, clean-up, or chemical handling.
Chlorine Analysers For Residual Chlorine Monitoring
Free residual chlorine and Total residual chlorine analysers measure the chlorine in water that is ‘residual’ (left over) after disinfection has happened. i.e. if you add chlorine to water it disinfects, and if there is any leftover, it is ‘residual’ and therefore available to disinfect more. This residual chlorine can be measured and used to give confidence that disinfection is complete. Pi has three products for measuring residual chlorine; HaloSense (that uses electrochemical sensors), DPDSense (that uses online DPD technology), and Chloribrid® (that uses a hybrid of both). Free chlorine refers to HOCl and OCl–, and total chlorine refers to free chlorine plus chloramines. Both free and total chlorine are effective disinfectants.
Circular Sight Glass Fittings
For pressureless applications up to max. 0.49 barg
Classic wooden chair
299 تومانScelerisque facilisi rhoncus non faucibus parturient senectus lobortis a ullamcorper vestibulum mi nibh ultricies a parturient gravida a vestibulum leo sem in. Est cum torquent mi in scelerisque leo aptent per at vitae ante eleifend mollis adipiscing.
Cleaning System EasyClean 100
Automated Sensor Rinsing.EasyClean100 has been developed to clean sensors installed in immersion housings. A specially designed spray head directs a jet of compressed air or flushing water at the sensing end of the sensor.
Cleaning in Open Basins or Channels
EasyClean 100 simplifies cleaning by enabling automatic sensor cleaning without removing the sensor and housing from the basin.
Closed Gas Tight Trimode (UTI)
Closed Gas Tight Trimode (UTI) Gauging Tape
Enhanced ‘CLOSED Gauging Systems
In a move to address the special needs of chemical and refined product carriers and barges, MMC International Corp. has announced the release of a new “closed” gauging system design.
Featuring an ullage range of 15-35 meters, the system uses a new “PeeK” plastic sensor suitable for most chemical products and also refined petroleum products.
CO2, CO or CH4 Analyzer
The 2008-IR MP model is a compact and reliable instrument for specific measurement of CO2 or CO or CH4 in gas blending. The instrument is based on non dispersion Infra red method (NDIR).
Coagulation Controller
Pi’s CoagSense coagulation controller is an integrated controller that accepts multiple inputs from appropriate parameters including pH, flow, temperature, UV254, turbidity and streaming current. From these measured parameters, the CoagSense outputs a flow proportional coagulation control signal that can go to a site SCADA or direct to control a coagulant dosing pump.
Colony Counter, Quebec, 220 Vac, 50 Hz
For counting bacterial colonies. Features 11.5 cm (4.5″) lens with 1.5x magnification to eliminate parallax erros; 40-watt tungsten bulbs to illuminate dark backgrounds; Wolffhuegel guide plate and 3-wire cord. Accomodates Stewart plates. Sheet metal case. Dimensions: 25 x 28 x 27 cm (10 x 11x 10.5″). CSA certified. 220V
Color process monitoring and analysis
Real-time process color monitoring. Non-Contact color measurement.
SpectraTrend HT supports implementation of today’s Total Quality Management programs such as LQM, PAT, Six Sigma, DMAIC, and others that share a common goal of producing consistent product quality and reducing waste.
Colour Reference Standard Saybolt
Colour Reference Standard Saybolt Colour +25, 500 mL
Column storage fitting
Capillary Flow Technology Fittings and Ferrules
Compact 1/16th DIN
| Mounting | 1/16 DIN Panel Mount |
| Dimensions | 1.89″ x 1.89″ x 5.24″ (max) |
| Communication | RS-485 |
| Certifications | UL, cUL, CE |
| Base Model |
Compressed Air and Electric Supply Systems
Conductix-Wampfler provides specialized systems to deliver compressed air and electric power to assembly lines. These systems are used to make compressed air, electrical power and digital data available primarily in assembly shops which use hand tools and in partly automated working processes and also feature tool carriers and tool transporters to allow workstations to move to where they are needed along the line.
Compression force transducers
- Vessels with low installation height
- Silo scales with low installation height
- Lifting platforms
- Stage construction
Cond Sensor
Cond Sensor UPW 3/4NPT 0.1C Ti 2
Electrode Resistivity Sensor.The UPW UniCond 2-electrode resistivity sensor was developed in collaboration with industry partners to provide best-in-class accuracy, stability, and environmental isolation in ultrapure water applications for the semiconductor industry.
Industry Leading Measurement Accuracy
The UPW UniCond sensor offers unequalled temperature compensated resistivity accuracy to provide the clearest possible picture of your water quality.
CONDUCTIVITY CELL
Cells for measuring conductivity with plastic
body and platinum electrodes.
The cell constant is K = 1.0 cm, corresponding
to a measuring range of 0uS÷100 mS.
Supplied with integral PT 100 temperature
sensor for thermocompensation of the
measurement.
These cells are suitable for all normal industrial
and process uses.
They can be installed inside immersion probe
holders, flow cells or direct insertion into pipes.
Control Valves
Aseptomag® single-seat control valves are used for the exact setting and control of parameters such as flow, pressure, temperature, or filling level in UltraClean and Aseptic processing plants. The inverted control valve is specifically designed for installations where product enters the valve from the bellows side.
Copper Test Strips, 0-3 mg/L
Copper exists in water as a soluble salt or as suspended solids. Concentrations exceeding 0.1 mg/L are useful for controlling algae and plankton growth. Quantities ranging from 0.02 to 0.1 mg/L are toxic for some fish, so its use for treating fish disease requires careful monitoring. With Hach’s copper test strips, technicians in the field can test many samples in only a few minutes, and make immediate evaluations on-site. No measuring, set-up, clean-up, or chemical handling are necessary.
