نمایش 81–120 از 961 نتیجه
AnaShell™ Analyzer Cabinets
Weather- and corrosion-resistant analyser cabinets as turnkey complete solutions
You need an enclosure, but space is scarce?
With the compact AnaShell analyser cabinets you protect your measurement technology reliably and permanently – even in the middle of production. One or two analysers as well as the associated sample preconditioning can be found here, safe from steam, vibrations, moisture and heat / cold.
AnaShell™ Walk-in Analyzer Shelters
Walk-in weather- and corrosion-resistant analyzer shelters as turnkey complete solutions
Are you looking for an enclosure that reliably and permanently protects your measurement technology from environmental influences?
Online analyzers have to deliver reliable measurement results around the clock. AnaShell analyzer shelters protect your measurement technology from damaging vapors, vibrations, precipitation, solar radiation and temperature fluctuations. For reliable results.
Angle Seat Valve – Bronze NPT
Save space while maintaining flow rates with the compact Series SAV-BT Angle Seat Valve. The pneumatic, externally piloted angle seat valve is operated by a single acting actuator with a mechanical spring for fail-safe operation. Select from either normally closed (NC) or normally open (NO) configurations. Bi-directional valves (normally closed) are designed for special applications that require flow in both directions and incorporate an anti-water hammer design for liquid applications flowing under the seat. Normally open valves can also be used to prevent water hammer on valve closure in liquid applications.
Annealed Seamless Straight Tubing, TMP Series
SS-TMP-1-020-10F
aquaBoll
further filtration fineness on request
Area Velocity Flow Meter
The Area Velocity Flow Measurement method is the most common method of all flow measurements. The AVFM 6.1 Area Velocity Flow Meter uses a submersible ultrasonic sensor measuring both the level and velocity of flowing liquid to calculate flow measurement in an open channel or pipe. The sensors are mounted either inside a pipe or at the bottom of a channel, and the sensor is built to resist fouling, corrosion, and abrasion. The AVFM 6.1 Area Velocity Flow Meter can be configured with the standard submerged velocity-level sensor or with submerged velocity in combination with a separate non-contacting ultrasonic level sensor, which is suitable for highly aerated fluids or those with a high concentration of suspended solids.
ASHH and ASUH Hazardous Location Amplified Speakers
- 15 watt (ASHH) or 30 watt (ASUH)
- 24VDC
- Four wire supervisable power circuit
- Reliable, solid-state circuitry
- Digital signal amplification
- Fused input and output
- Built-in gain control
ASTM Method D5191 Vapor Pressure – 51.1kPa
Product Code:DRE-GS09010493
CAS Number:79-29-8
Product Format:Single Solution
Lot Number:2-H522872NA
Expiry:2029-06-30
Regulatory Method:ASTM Method D5191
Molecular Formula:C6 H14
Molecular Weight:86.18
Augue adipiscing euismod
Scelerisque facilisi rhoncus non faucibus parturient senectus lobortis a ullamcorper vestibulum mi nibh ultricies a parturient gravida a vestibulum leo sem in. Est cum torquent mi in scelerisque leo aptent per at vitae ante eleifend mollis adipiscing.
Automated Headspace Vial Sampler
Static Headspace
Static Headspace is a technique used for sampling the gas phase of a sample. The technique can be used for both qualitative and quantitative analysis.
Static headspace is one of the most popular techniques for gas chromatography due to its versatility for analysing volatile organic compounds (VOCs) in a complex variety of matrices. This is because it eliminates tedious sample preparation steps, as well as prevents contamination problems that are common to other sample introduction techniques.
Automation Weight Indicators
Ultra-fast weight indicators for automated weighing systems
The IND360 family offers three modules based on the same core technology with global approvals to minimize complexity for machine builders, integrators and end-users when designing customized solutions. The indicator family allows you to reuse existing PLC software for different needs with the optimal housing and interface technology for each project.
Autonomus combustible gas detector
S500L-IR and S500LT-IR models are high quality and autonomous NDIR (Non Dispersive Infra Red) gas sensors which offer a lot of sophisticated functions to give quick and reliable warnings against explosive concentrations of combustible gases.
Axial Fans
The VAO axial fans with adjustable pitch blades are specially designed for application where large air volumes with comparatively low pressure are required, as for instance in large air conditioning systems, industrial ventilation,ship and mine ventilation, vapour and fume exhaust , evaporative cooling towers, air cooled, heat exchangers etc.
B – Indoor keyed
Number of contacts Low Voltage4ProtocolUSB 2.0 (480Mb/s)Wire Size/AWG30 – 22GenderStandardPlugPlug – StraightLocking systemPush-pullJacket cable outside diameter [mm]4.30 – 5.20 mmSize0B
B – Indoor keyed
Number of contacts Low Voltage2Wire Size/AWG16 – 12GenderStandardSocket / ReceptacleSocket / Receptacle – Fixed Panel Front MountedLocking systemPush-pullJacket cable outside diameter [mm]2.00 – 13.60 mmSize2B
B – Indoor keyed
Number of contacts Low Voltage14GenderStandardLocking systemPush-pullSize1B
B – Indoor keyed
Number of contacts Low Voltage5Wire Size/AWG30 – 22GenderStandardPlugPlug – StraightLocking systemPush-pullJacket cable outside diameter [mm]2.30 – 3.20 mmSize0B
B – Indoor keyed
Number of contacts Low Voltage8Wire Size/AWG30 – 22GenderStandardSocket / ReceptacleSocket / Receptacle – Fixed Panel Rear MountedLocking systemPush-pullJacket cable outside diameter [mm]2.00 – 13.60 mmSize2B
Bag, FlexFoil PLUS, Breath-gas
Bag, FlexFoil PLUS, Breath-gas, stainless steel, 1 L, pk/5 Overview
FlexFoil® PLUS 1-liter Sample Bags with stainless steel breath-gas analysis fitting and individually packaged clean mouthpieces, pk/5
External dimensions: 8.75 x 9.75 inches
May be subject to additional freight charges
Bag, Tedlar, Breath-gas, polypropylene
Bag, Tedlar, Breath-gas, polypropylene, 1 L, pk/5 Overview
Tedlar® 1-liter Sample Bags with polypropylene fitting, fitting adapters, and individually packaged clean mouthpieces, pk/5
May be subject to additional freight charges
Balance XPR226DR
Peak Performance, Effortless Compliance
Exceptional results and smart quality assurance. 121/220 g capacity, 0.005/0.01 mg readability; integrated methods; results notepad; hanging weighing pan; easy cleaning; ErgoClip one-step dosing; LabX and automatic dispensing options
Balance XPR226DRQ
Balance XPR226DRQ
The New Standard Way of Weighing
Automated dispensing of powders and liquids is the new standard of weighing in today’s modern laboratory. The simple process requires no training.
Ball Valve BFSS-FL4
BFSS-FL4
Ball Valve BFSS-FL6
BFSS-FL6
Ball Valve BFSS-FL8
BFSS-FL8
Ball Valve BFSS-FNS2
BFSS-FNS2
Ball Valve BFSS-FNS8
BFSS-FNS8
Ball Valves > 3-piece, ~3000 psig, BH Series
BHSS-FL16-22-FDA-IE
Ball Valves BFSS-FNS4-P-3DL-LT
BFSS-FNS4-P-3DL-LT
Baths WCH Circulation water bath 8/12/22/30 Liter 250°C ±0,1°C
Ideal for:
- applications at high temperature
- biotechnology, clinical, environmental, medical, petroleum & food industry, pharmaceutical and industrial applications
- connection with evaporators and viscometers is applicable
Baths WVB Viscosity bath 100°C ±0,1°C
Ideal for:
- precise measurement with capillary viscometers
BCFN SERIES CENTRIFUGAL FANS/BLOWERS
Centrifugal fans type BCFN are designed for heavy duty industrial applications with high flow rate and where the complete reliability is considered essential.
Usual design conditions are:
- volumetric flowrate up to 700.000 m3/h
- static pressure up to 600 mmH2O
- installed power up to 800 kW
BCSN SERIES CENTRIFUGAL FANS/BLOWERS
Centrifugal fans type BCSN are designed for heavy duty industrial applications with high flow rate and where the complete reliability is considered essential.
Usual design conditions are:
- volumetric flowrate up to 700.000 m3/h
- static pressure up to 1.000 mmH2O
- installed power up to 2.000 kW
BDC SERIES TURBOFANS
Turbofans type BDC are designed for very high pressure and low flow rate applications.
Turbafans has a unique impeller innovative design (diameter of up to 2000 mm) which leads to static efficiencies up to 85%.
This innovative design differs from current canonical centrifugal ones, allowing the flow to go through the impeller free of turbulences,thus improving aerodynamic efficiency and reducing mechanical loses.
Beaker 250 ml, low form Borosilicate 3.3 pack of 10
Manufactured from heat resistant, durable borosilicate glass according to ISO 3819 and DIN 12331 standards. Thick wall, heavy base and reinforced rim prevent breakage during washing and transportation. Volume graduations and inscriptions are printed with white enamel.
Beaker low form with spout
- Beaker, low form
- DURAN® glass
- acc. to ISO 3819 (10.000 ml Non-DIN/ISO size)
- with graduation (5ml and 10ml without graduation)
- with spout
Beryllium (Be) standard, 1,000 µg/mL
Atomic Absorption Calibration Standards
Beryllium (Be) standard, 1,000 µg/mL, in 5% HNO3, for AA and MP-AES, 500 mL
Beryllium (Be) standard, 10 µg/mL, in 2% HNO3, 100 mL
Single Element Standards
Part Number:
Beryllium (Be) standard, 10 µg/mL, in 2% HNO3, 100 mL
Beryllium (Be), 50 mm, coded HC lamp
Hollow Cathode Lamps for PerkinElmer AAS Instruments
Beryllium (Be), 50 mm, coded HC lamp, for PerkinElmer AA. Coded 50 mm hollow cathode lamp for Beryllium (Be). Element coding enables automatic setup. Equivalent to the Lumina HC lamps, ensuring compatibility with PerkinElmer’s range of AAS instruments.
Beveled edge needle for G1811A
Autosampler
Part Number:
Beveled edge needle for G1811A
