نمایش 881–920 از 961 نتیجه
TRICHLOROETHYLENE Tube
1. PERFORMANCE
1) Measuring range ：2.3-36.8 ppm 1-16 ppm 0.2-3.2 ppm
Number of pump strokes 1/2（50mr） 1（100mr） 4（400mr）
2) Sampling time ：1.5 minutes/1 pump stroke
3) Detectable limit ：0.1 ppm（400mr）
4) Shelf life ：1 year（Necessary to store in refrigerated conditions ; 0～10℃）
5) Operating temperature ：0～40℃
6) Reading ：Direct reading from the scale calibrated by 1 pump stroke
7) Colour change ：Pale orange→Blueish purple
Triple Adjustable Low Flow Tube Holder
Triple Multiple-tube Low Flow Holders holds 3 Tubes, protective tube covers sold separately; not for use with 222 Series Pumps
TS SERIES CENTRIFUGAL FANS/BLOWERS
Centrifugal fans type TS are designed for heavy duty industrial applications medium flow rate and where the complete reliability is considered essential.
Usual design conditions are:
- volumetric flowrate up to 250.000 m3/h
- static pressure up to 1400 mmH2O
- installed power up to 1000 kW
TU5200 Benchtop Laser Turbidimeter
The platform employs a patented optical design that sees more of your sample than any other turbidimeter, delivering the best low level precision and sensitivity while minimizing variability from test to test. For the first time you will be able to remove the uncertainty of which measurement to trust, thanks to identical 360° x 90° Detection® Technology in both, lab and process, instruments. The TU5 Series® dramatically reduces the time needed to get a turbidity measurement you can rely on.
Tubing and Retention Gaps
Undeactivated Fused Silica, 10 m, 0.05 mm, 0.36 mm OD
Tubing and Retention Gaps
Deactivated Fused Silica, High Temp, 5 m, 0.05 mm, 0.36 mm OD
Turbidity Meter
Online Turbidity Meters from Pi are called TurbSense® and include analysers, controllers and monitors which determine true online turbidity and/or suspended solids in water, using a nephelometric measurement of scattered light in accordance with ISO 7027. The TurbSense® sensor uses LED optical technology to provide an extremely stable, accurate, low maintenance sensor.
Turbidity Sensor
Turbidity Sensor InPro8610ie
Great Performance and Easy Handling.The InPro 8610i e turbidity sensor is designed for turbidity measurement in brewery, beverage, dairy or reclaimed water applications. It provides high measurement accuracy due to multipoint calibration and immunity to background changes.
Turbine flow meters TM
PRECISE AND EFFECTIVE
KRACHT TM turbine flow meters are proven and widely used measuring devices in industrial fluid measurement technology. The instruments provide reliable, continuous and accurate measurement of liquids flowing under pressure in closed pipes. Thanks to the stainless steel design, the flow meters are suitable for a variety of even aggressive media.
Type 7010 – Pneumatically operated angle seat valve
Pneumatically operated angle seat valve is the extremely reliable allrounder in valve technology and is predestined for very high switching capacities.
In stainless steel design for neutral and aggressive media but also for a wide range of temperature applications suitable. The angled seat design offers a high flow rate.
Type 7015 – Hygienic angle seat valve
The hygienic angle seat valve type 7015 is ideal for applications in food and beverage production. The valve can be used to shut-off product streams, drinking water, CO2, nitrogen as well as sterile steam and sterile air. All wetted plastics are FDA-compliant and conform to EC Regulation 1935/2004 and the EU Plastics Regulation 10/2011
Type 7025 – Hygienic angle seat control valve
The hygienic angle seat control valve type 7025 with integrated digital positioner is specially adapted for use in the food and beverages production. Suitable for controlling product streams, drinking water, CO2, nitrogen as well as sterile steam and sterile air. All wetted plastics are FDA-compliant and conform to EC Regulation 1935/2004 and the EU Plastics Regulation 10/2011. The hygienic angle seat valve is also certified to Technical Instructions on Air Quality Control (TA-Luft) in accordance to ISO 15848-1 and on request can be supplied with an acceptance test certificate in accordance with EN10204 3.1.
Type 7042 – Low Flow Valve
The low flow valve type 7042 with integrated positioner is ideal for precise control at high pressures and very low flow rates. As a safe on/off valve, the low flow valve type 7042 can be used especially for high pressures. With a metal seat seal and optional top-mounted positioner in IO-Link, IIoT module, ATEX or FM version, this high-pressure valve is widely used for gases and liquids in a variety of industrial applications.
Type 7081 – Three-way valve made from stainless steel
Pneumatic actuated three-way valve made from stainless steel for neutral and aggressive media and high cycle applications.
Pressure:
PN 40
Material:
Stainless steel 1.4408
Temperature:
Media temperature -30 °C to +200 °CApplications up to +220 °C
Type 7310 – Angle seat motor valve
Highly accurate angle seat motor valve for on/off and control operation with neutral and aggressive media. A version with fail-safe option is available.
Size:
DN 40 – DN 80
Pressure:
PN 40
Material:
Stainless steel 1.4408
Temperature:
Media temperature -30 °C to +200 °C
Applications up to +220°C
Type 8020 – Sliding gate valve
Product line GS1
The sliding gate valve type 8020 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications this valve is the clear choice.
Type 8021 – Sliding gate valve
Product line GS1
The sliding gate valve type 8021 with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled.
Size:
DN15 – DN150
Pressure:
PN 10/40
Material:
Stainless steel 1.4408
Carbon steel 1.0619
Temperature:
Media temperature: -60 °C up to 350 °C
Special versions available on request.
Type 8028 – Sliding gate valve
Product line GS1
The pneumatic sliding gate valve type 8028 with integrated positioner and with an 80 mm diaphragm actuator is ideal for compact plant installations in process technology. In addition to the compact design, this valve is characterised by high control precision and a long service life.
Size:
DN15 – DN150
Pressure:
PN 10/40
Material:
Stainless steel 1.4408
Carbon steel 1.0619
Temperature:
Media temperature: -10 °C up to 350 °C
Special versions available on request.
Type 8035 – Sliding gate motor valve
Product line GS1
The sliding gate motor valve type 8035 features a fail-safe mechanical spring return. It is ideal where mechanical fail-safe options are contained within the specification, e.g. steam and district heating systems.
Size
Size:
DN15 – DN150
Pressure:
PN 10/40
Material:
Stainless steel 1.4408
Carbon steel 1.0619
Temperature:
Media temperature: -60 °C up to 350 °C
Special versions available on request.
Type 8036 – Sliding gate motor valve
Product line GS1
The sliding gate motor valve type 8036 is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle.
Size:
DN15 – DN150
Pressure:
PN 10/40
Material:
Stainless steel 1.4408
Carbon steel 1.0619
Temperature:
Media temperature: -60 °C up to 350 °C
Special versions available on request.
Type 8037 – Sliding gate motor valve
Product line GS1
The sliding gate motor valve type 8037 is suitable for the intended use in potentially explosive atmospheres according to Directive 94/9EG. Media such as steam, liquids, gases etc. can excellently be controlled with this motor valve, even in hazardous areas.
Size:
DN15 – DN150
Pressure:
PN 10/40
Material:
Stainless steel 1.4408
Carbon steel 1.0619
Temperature:
Media temperature: -60 °C up to 350 °C
Special versions available on request.
Type 8051 – Sliding gate valve
Product line GS1
The sliding gate valve type 8051 in short design is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.
Size:
DN15 – DN150
Pressure:
PN 10/40
Material:
Stainless steel 1.4408
Carbon steel 1.0619
Temperature:
Media temperature: -60 °C up to 230 °C
Special versions available on request.
Ultrasonic Liquid Level LoRaWAN Sensor
R718PE is a wireless communication device that uses ultrasound to detect the distance between the device and the detected object. The medium the device detects is the air, so the detected object can be any liquid or solid that has a flat and horizontal surface, water level for example. The main body and the sensor of R718PE communicates via the UART serial port, and the detected data can be transmitted via LoRaTM communication. Application examples include water level monitoring of water tank or well, detect horizontal surface distance value, or solid object level detection.
Features & Benefits:
- Integrates with Honeywell Remote Building Manager
- Compatible with LoRaWAN Class A
- Frequency hoppin spread spectrum (FHSS)
Ultraturb Seawater sc Turbidimeter
Turbidities in the range of FNU (NTU) 0.0001-1,000 are measured and displayed alphanumerically using a controller. This high resolution facilitates precision differentiation, even for ultra clear liquids. A pulsed, long-life IR radiation source (LED) ensures that costs are minimized. Designed in accordance with DIN EN ISO 7027 and permanently calibrated before leaving the factory. All key data is set to practical standard values.
Unison Bellows
Unison manufactures tightly controlled, thin-walled, precision hydroformed bellows as a stand-alone assembly or for use in switches serving as either a flexible mechanical seal or a precision pressure sensing element.
Unison Sensors
Our Temperature and Speed sensors are designed to withstand harsh environmental conditions for both high altitude, high-performance aircraft to marine and ground-based turbine and industrial applications.
Unison Switches
Unison offers precision absolute and differential pressure switches, as well as high-temperature mechanical position or limit switches for harsh environment applications.
Universal 44XR Sample Pump
Universal 44XR Pump only, with NiMH battery and screwdriver set, charger not included
Flow range: Constant flow 5 to 5000 ml/min
Universal cabinet UF30
Standard delivery Universal oven
The universally applicable lab oven U is Memmert’s classic appliance for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology.
UTI Oil-Water Gauging Tapes
Standard Applications:
- Restricted (“R” type)
- Gauging
- Restricted gauging via our tank-top gauging stations and vapor control valves
Vapor Control Sampling for “Closed” Tank Sampling
- Fixed-In-Place (FIP)
- Portable-In-Place (PIP)
- Both Flexi-Dip systems
MMC’s Flexi-Dip Tank Sampling System is available in two varieties: the Fixed-In-Place (FIP) version designed for use with MMC’s unique S series vapor control valves with built-in sampling ports, and the Portable-In-Place (PIP) version designed for use with any standard MMC vapor control valve. Both Flexi-Dip systems are made entirely in the USA by MMC.
Vapor Control Sampling Valves and Equipment for “Closed” Tank Sampling
- Fixed-In-Place (FIP)
- Portable-In-Place (PIP)
- Both Flexi-Dip systems
MMC’s Flexi-Dip Tank Sampling System is available in two varieties: the Fixed-In-Place (FIP) version designed for use with MMC’s unique S series vapor control valves with built-in sampling ports, and the Portable-In-Place (PIP) version designed for use with any standard MMC vapor control valve. Both Flexi-Dip systems are made entirely in the USA by MMC.
Vapor Control Valves for Gauging, Sampling
- MMC B-type vapor-control valves
- Positive shut-off units
- Trimode tank gauging
- Ullage, interface, temperature and oxygen sensing
- B-type, Micro “B” and the MMC (Asia) F50 are 2″ (50mm) full-bore valves
- Flanged valves for easy installation and accurate positioning
- Constructed of grade 316 stainless steel with a stainless steel cap. (Bronze cap available upon request.)
- Stainless steel ball valves with Teflon ball valve seals
- Available in 1/2 or 1/3 liter sampling, size 2″ with MMC sampling tapes
- 1″ valves available for manual tank sounding
- 3″ valves available for 1 liter sampling
Variable Area Flowmeters
Technical Features
- • Measuring tube in AISI 316
- Float and wetted parts in AISI 316
- Magnetic of reading transmission
- Aluminium housing IP 66
- Vertical mounting with rising flow
- Measuring range: 1/10 – scale ~ 100 mm.
- Accuracy: 1,5 % v.f.s.
Variable Area Flowmeters
Calibrated flange-type orifice plate flowmeters with offtake flowmeter for large and very large flows.
APPLICAZIONI
Flowmeters can be used in the following industries: chemical and petrochemical, pulp and paper, food and sugar, pharmaceutical, glass, textile, mining, metallurgical and galvanizing industry.
The instruments can also be used by manufacturers of water treatment plants, wine, thermal, hospital and anti-pollution plants.
